La Marzocco LEVA X - Leva Heater

EN
87
Display
Operating Procedure
Description
“Technical” Programming
Menu 93.2°C
Enter Password
0000
1
After entering the password and accessing the "Technician" programming menu, rotate the Encoder Knob until
the following is displayed.
Menu 93.2°C
Leva Heater
Settings
2
Press the Encoder Knob to access the menu.
Menu 93.2°C
Heater Mode
LOW POWER
3
Press the Encoder Knob to access the menu, rotate the Encoder Knob to choose between HIGH PERFORMANCE and
LOW POWER, press the Encoder Knob to conrm the option.
Menu 93.2°C
Leva Heater
Exit
4
Press the Encoder Knob to quit the submenu.
• This parameter allows the technician to
set the draw of the machine.
• Advanced performance: All the heating
resistances of the Leva group can operate
in simultaneous mode in addition to the
other resistances of the machine.
• Low power: the draw of the machine is
limited to boiler heating, even if the
accessory resistances of the groups
operate in an alternating manner.
Leva Heater
Menu 93.2°C
Display Max
Brightness
100%
Menu 93.2°C
Accessory Board
Settings
Menu 93.2°C
Leva Heater
Settings