immobilizer, do not attach two or
more ignition switch keys to one
ring.
The ignition disabling by the train-
ing key results in the immobilizer sig-
nal indicator blinking which is not
indicative of the failure.
The front doors are locked: from
outside – with Key 1 (Fig. 3) or (in the
design variant) with the remote con-
trol pane; from inside – by pressing
the lock push-button 1 («by depres-
sion») (Fig. 4a, 5a) in the door or (in
the design variant) with the push-
button in the driver's door mod-
ule (Fig. 6b). To lock the lock is pos-
sible with the doors closed.
The push-button in the dri-
ver's door module (in the design
variant) is intended for the vehicle
doors simultaneous locking or un-
locking. During pressing this push-
button the change of the door lock
status occurs. For example, if the
12
vehicle doors were unlocked, after
pressing this key the doors become
locked, and vice versa.
DOORS
Fig. 3. Opening the door
Fig. 4a. Left hand front door
Fig. 4b. Left hand front door with the
speaker
(in the design variant)
To Next Page
Loading...
Need help?
General
