not efficient enough, then, holding
belt tongue 2 in hand, find the belt
band position in which it completely
returns into the reel.
ATTENTION!
It is not allowed to leave the
vehicle without making sure that
the belt has been fully returned to
its initial position, to prevent the
band from being pulled out with
you and avoid inflicting damage
to it when closing the vehicle
doors. In such case the seat belt
may become inapplicable for fur-
ther operation.
In the design variant, the front
seat belts are adjusted according to
20
SEAT BELTS
Seat belts are effective for the
driver and passengers protection
against serious consequences of
road traffic accidents (RTA).
To fasten the belt, pull it out
smoothly, holding the belt tongue
(Fig. 13), and insert tongue 2 (Fig.
14a) into lock 1 until it clicks, mean-
while, avoid twisting the bands. Make
sure that the lower belt strap fits tight
against your hips. It is not allowed to
pass the belt lower band around the
waist or under the hips. To unfasten
the belt press the lock red button, the
belt will be pulled into the reel auto-
matically. If the belt band pulling in is
Fig. 14a. Fastening the seat belt Fig. 14b. Adjusting the seat belt
(in the design variant)
Fig. 13. Pulling the seat belt out
Fig. 14c. Mini-lock of the back
middle seat passenger seat belt
To Next Page
Loading...
Need help?
General
