The headrest (Fig. 10) height
adjustment is carried out by applying
direct action on the headrest. The
adjustment down is performed by
pressing the headrest stop lever 1
from the right side. To remove the
headrest from the seat back, shift the
headrest to its highest position and
press its lock lever from the right
side.
The optimum headrest position is
when its top edge is on the same
level with the top of the head. In case
it is unattainable, for very tall people,
it is necessary to raise the headrest
to its highest position, and for very
short people – to its lowest position.
Rear seats. To expand luggage
compartment area, the back seat
folding down option is provided.
18
The seat back tilt is adjusted by
handle 2 stepless rotation.
In the design variant, the front
seats are equipped with the electric
heaters that are switched on with
switch 15 (see Fig. 28), when the
engine is running. To enable the left
hand seat heating press the left
switch; to enable the right hand seat
heating press the right switch. The
heating disabling is performed by re-
pressing the switch.
The check light signal indicator
located on the switch key-button will
glow orange for the duration of the
heater operation.
Fig. 10. Headrest
Fig. 11a. Folding the rear seat down
Fig. 11b. Folding down the rear seat with the headrests
(in the design variant)