Lainox MCR031E User Manual

6
ration. In the event of any malfunction, consult the next
paragraph"Troubleshooting".
Switch on the appliance as directed in the instructions and re-
minders for use given in Chapter " INSTRUCTIONS FOR USE
" and check:
• the current values of each phase.
• the correct operation of the heating elements.
12 TROUBLESHOOTING
The appliance does not heat.
Possible causes:
• Temperature thermostat defective.
• Heating elements defective.
• Safety thermostat tripped.
Heating cannot be adjusted.
Possible causes:
• Temperature thermostat defective.
13 REPLACING COMPONENTS
REMINDERS FOR REPLACING COMPONENTS.
• Disconnect the appliance electrical power supply, if present,
before proceeding with any operation.
• After replacing a gas system component, check for gas leaks
at connection points.
• After replacing an electrical system component, check it is
correctly wired.
• When replacing the radiant hotplates, handle and re-assem-
ble parts with the utmost care.
Working thermostat replacement
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Safety thermostat replacement.
• Remove the rear panel of the appliance.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
14 CLEANING THE INTERIOR
• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.
15 MAIN COMPONENTS
• Working thermostat
• Heating element
• Safety thermostat

Lainox MCR031E Specifications

General

Brand	Lainox
Model	MCR031E
Category	Oven
Language	English