Lainox Naboo boosted - Setting Up Manual Cooking; Manual Cooking Mode Configuration

- 16 -
7 • SETTING UP MANUAL COOKING
Press the icon to set Manual cooking.
• Select a cooking mode.
The cooking modes are: Convection, Steam and Mixed.
Naboo starts with a default temperature based on the mode selected and infinite time.
Once the cooking mode has been set, the following cooking parameters can be customised:
• Temperature
This is set through the touchscreen. Scrolling to the right increases the value and scrolling to the
left decreases it. To make an accurate setting, press [+] to increase the value of a unit or [-] to
decrease the value of a unit.
The value shown at the centre is the set value, the value shown on the right is the current value.
• Timed / Core probe
Timed cooking is set by default.
To switch to probe cooking, press the related key.
This is set through the touchscreen. Scrolling to the right increases the value and scrolling to the
left decreases it. To make an accurate setting, press [+] to increase the value of a unit or [-] to
decrease the value of a unit.
The value shown at the centre is the set value, the value shown on the right is the current value.
158°C
90037400rev00