5-1
5: UDS-10B
Overview
The UDS-10B (part number UDS-10B) is designed to be easily and quickly integrated into
products. Serial interface is accomplished via a female DB25 (DCE) connector which
provides the necessary signals for both RS232 and RS422/RS485 interfaces.
In addition, an RJ45 (10BASE-T) connector is available for Ethernet access. It will support
network speeds of 10Mbps.
The UDS-10B board comes with various power supply options:
! a power jack for 9-30 VDC or 9-24 VAC with maximum 140mA.
! power via the DB25 inputs at either the regulated +5 VDC with maximum 200mA
or the unregulated 9-30 VDC.
The UDS-10B’s well-developed IP firmware supports protocols such as ARP, UDP, TCP,
Telnet,ICMP,SNMP,BOOTP,DHCP,TFTP,HTTP,andcustomprotocols.
To Next Page
Loading...
Need help?
General