How to resolve insufficient rights error on Lantronix Server?
If you lack the necessary permissions to execute a command on your PC while using Lantronix Server, ask your IT department to log you in with an account that has sufficient rights.
General| Isolation | 1.5 kV |
|---|---|
| Certification | UL, CSA, FCC, CE, TUV, CTick, VCC, UL 864 RoHS |
| Serial interface type | RS-232/422/485 |
| Serial ports quantity | 1 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Electrostatic Discharge (ESD) protection | 15 kV |
| Cabling technology | 10/100Base-T(X) |
| USB 2.0 ports quantity | 0 |
| Supported network protocols | ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP |
| Built-in processor | Lantronix DSTNI-EX |
| Processor frequency | 48 MHz |
| Compatible operating systems | Windows 98/ME/NT/2000/XP |
| Flash memory | 2 MB |
| RAM capacity | 0.256 MB |
| LED indicators | LAN |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating temperature (T-T) | 0 - 60 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Input voltage | 100 - 240 V |
Weight and Dimensions| Weight | 400 g |
|---|---|
| Dimensions (WxDxH) | 72 x 23 x 95 mm |
Lists all items included in the UDS1100 package for verification.
Provides step-by-step instructions for physically connecting and setting up the UDS device.
Details essential information like hardware and IP addresses needed before device configuration.
Configures network parameters such as IP address, subnet mask, and gateway via a web browser.
Sets up device server parameters including Telnet password and keepalive settings.
Defines serial port settings like protocol, baud rate, and flow control for the device.
Explains how to establish Telnet or serial connections to enter the device's command-line interface.
Details the procedure for accessing Setup Mode using a serial terminal connection.
Configures network settings (IP, Gateway, Netmask) using the Setup Mode command-line interface.
Configures serial port parameters like baud rate and interface mode via the Setup Mode CLI.
Explains the function of the device's LEDs for diagnosing operational status and errors.
Provides solutions for common issues and error messages encountered with the device.
Offers contact details and procedures for obtaining assistance from Lantronix technical support.
Describes the serial port connector and its pinout for RS-232, RS-422, and RS-485 interfaces.
Details the RJ45 Ethernet port and its connection for network interface.
To Next Page
