EasyManuals Logo

Laser Technology LTI 20/20 TruSpeed User Manual

Laser Technology LTI 20/20 TruSpeed
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Page 30 - Laser Technology, Inc. LTI 20/20 TruSpeed Metric User’s Manual 3rd Edition
Copyright (c)[2013] Laser Technology, Inc. All rights reserved. Unauthorized duplication, in whole or in part, is strictly prohibited
Delta Distance Test
The Delta Distance Test requires two targets. The distances to each target are not
crucial. However. LTI recommends that the distance between the targets be to a
whole meter for ease of use. The minimum distance to the closest target must be
greater than the minimum distance of the instrument which is 15.25 meters.
Please refer to Figure #27 as a guide for positioning the targets and the shooting
mark.
1. Install the farthest target.
2. Measure 55 meters to the shooting mark and mark the shooting spot.
3. Measure from the shooting mark to the closer target at 45 meters.
4. Install the closer target at 45 meters.
Your TruSpeed may not include the Delta Distance Test. It is a
factory-defined option that is set when the instrument is shipped.
Figure #27

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Laser Technology LTI 20/20 TruSpeed and is the answer not in the manual?

Laser Technology LTI 20/20 TruSpeed Specifications

General IconGeneral
BrandLaser Technology
ModelLTI 20/20 TruSpeed
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals