Laser Technology LTI 20/20 TruSpeed User Manual

Page 6 - Laser Technology, Inc. LTI 20/20 TruSpeed Metric User’s Manual 3rd Edition
Copyright (c)[2013] Laser Technology, Inc. All rights reserved. Unauthorized duplication, in whole or in part, is strictly prohibited
Buttons on the Keypad
The TruSpeed has a 7-button keypad located on the rear panel of the instrument.
The buttons provide easy access to the instrument functions. The table below
lists the buttons and the functions of each.
Button Name Function
Speed
Mode
Activates the instrument’s speed
measurement mode.
Speed Limit Edit Function: Accepts the
value that appears on the screen.
Weather
Mode
Activates an alternate speed measurement
mode: simplified gating option.
Targets must be at a distance greater than
61 meters.
Speed Limit Edit Function: Adds 1 to the
value of the flashing digit.
Continuous
Mode
Activates an alternate speed measurement
mode: allows you to obtain successive
speed readings on a target vehicle.
Speed Limit Edit Function: (1) Activates the
edit function. The right-most digit will be
flashing. (2) Press to edit the digit to the
left of the flashing digit.
Backlight Toggles the display backlight ON/OFF.
Test
Mode
Activates the instrument’s Test Mode:
allows you to verify the TruSpeed’s
mechanics.
Speed Limit Edit Function: Subtracts 1 from
the value of the flashing digit.
Brightness
Control
Varies the intensity of the in-scope aiming
reticle.
Power
ON/OFF
Press and release to power ON the
instrument.
Press-and-Hold for approximately 3 seconds
to power OFF the instrument.

Laser Technology LTI 20/20 TruSpeed Specifications

General

Brand	Laser Technology
Model	LTI 20/20 TruSpeed
Category	Measuring Instruments
Language	English