Laser Technology TruPulse L2 User Manual

Laser Technology, Inc. TruPulse L2 User’s Manual 1st Edition
Section 3 - Basic Measurement
Page 7
Copyright© 2023, Laser Technology, Inc. All rights reserved.
Section 3 - Basic Measurement
1. Press FIRE button to power ON the TruPulse L2. Select a target such as a tree or a building.
2. Look through the eyepiece and use the crosshair to aim to the target.
3. Press-and-hold the fire button. The Laser indicator is displayed while the laser is active measuring.
• If a target is acquired, measurement results will be displayed, flash 3 times and laser indicator turns off.
• If a target is not acquired immediately, the laser will remain active for a maximum
of 10 seconds while acquiring data about the target.
• If the target is not acquired, release and fire button and repeat steps.
4. Release FIRE button once the measurement results are displayed.
NOTE The measurement will be displayed steady until you press a button or the unit powers OFF.
Slope Distance Basic Measurement Workflow
Figure 4

Laser Technology TruPulse L2 Specifications

General

Brand	Laser Technology
Model	TruPulse L2
Category	Measuring Instruments
Language	English