LaserLiner ThermoXplorer Pro User Manual

ThermoXplorer Pro
DE
02
GB
26
NL
50
FR
74
IT
98
Thermal Imager
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@pce-instruments.com

LaserLiner ThermoXplorer Pro Specifications

General

Brand	LaserLiner
Model	ThermoXplorer Pro
Category	IP Camera
Language	English

Summary

Function and Application of the Thermal Imager

Device Operation: Battery Charging

Device Navigation: Main Menu

General Settings: System Settings

System Settings: Autocalibration

Measurement Specific Settings: Measurement

Measurement Specific Settings: Temperature Range

Measurement Specific Settings: Measurement Parameters

Measurement Specific Settings: Setup

Emissivity Coefficient

Set emissivity factor based on material for accurate measurements.

Setup: Temperature Correction

T Correct

Correct temperature readings based on ambient conditions.

Measurement Specific Settings: Alarm and ISO

Temperature Alarm Configuration

Configure audible alarms for temperature thresholds.

Isothermal Function Settings

Isothermal Function

Display specific temperature ranges with a custom colour scheme.

Selecting Target Objects

Activate/Deactivate Measurement Points

Measurement Points Parameters

Set and configure parameters for measurement points.

Measurement Points: Manual Positioning

Manual Measurement Point Positioning

Manually position measurement points on the thermal image.

Hot Spot and Cold Spot Measurement

Activate/Deactivate Horizontal Line Measurement

Horizontal Line Measurement Arrangement

Configure the display and bargraph for horizontal line measurements.

Horizontal Line Measurement Parameters

Set parameters for horizontal line temperature analysis.

Positioning Horizontal Lines

Manually position horizontal measurement lines on the thermal image.

Activate/Deactivate Vertical Line Measurement

Activate/Deactivate Area Measurement

Area Measurement Parameters

Set parameters for area temperature analysis.

Manual Temperature Range Adjustment

Media Gallery and Playback Mode

Image Recording

Recording Settings

Recording Settings

Automatic Recording

Recording Management: Deletion

General Safety Instructions