Launch X-431 IMMO ELITE - Key Immobilizer Functions; Key Immobilizer (IMMO) Operations

LAUNCH X-431 IMMO ELITE User Manual
5 Key Immobilizer & Immobilizer Programming
5.1 Key Immobilizer (IMMO)
This function enables you to perform the anti-theft key matching function, so that
the immobilizer control system on the car identifies and authorizes remote
control keys to normally use the car.
It needs to be performed in the following cases:
When the ignition switch key, ignition switch, combined instrument panel, ECU,
BCM, or remote control battery is replaced.
5.1.1 Vehicle connection
1). For most vehicles, just use the included diagnostic cable to connect the VCI
to the vehicle’s DLC port.
2). For other vehicles (including but not limited to the Mercedes Benz,
Volkswagen, BMW and Porsche), the X-PROG 3 is required.
A: DB15 to OBD16 diagnostic cable
B: Main diagnostic cable included with the X-PROG 3 immobilizer programmer
19