LAUNCH X-431 IMMO ELITE User Manual
In this case, camera scan and enter VIN are available.
A. Camera Scan: In this mode, the VCI should be connected to the vehicle’s
DLC first, and then a Bluetooth communication should be established
between the tablet and the VCI.
Tap Camera Scan, a screen similar to the following will appear:
Place the VIN inside the viewfinder rectangle to scan it. The most
recognizable location for this number is in the top left corner on the vehicle’s
dashboard. Other locations include the driver’s door or post, and the firewall
under the hood.
• Tap
to switch the display mode of the screen.
• Tap
to turn the camera flash on.
• Tap
to choose it from the record list if the VIN of the vehicle has been
30
To Next Page
Loading...
