Launch X-431 PRO3 User Manual

LAUNCH X-431 PRO3 User Manual
33
Fig. 5-16
Tap “Scan” to start searching for the VCI connector. Once it is found, tap it to start
pairing.
If the X-431 PRO3 handset has paired with the VCI connector, it will enter Step 2
directly.
Confirm:
Tap it to go to next step.
2). Select test item: Select the desired test item to proceed.
Fig. 5-17
www.launch-cis.ru

Launch X-431 PRO3 Specifications

General

Display	10.1 inch
Connectivity	Wi-Fi, Bluetooth
Camera	Rear 5MP
Supported Protocols	CAN
Diagnostic Functions	Full system diagnostics, coding