UNCONTROLLED IF PRINTED 20
What’s in the phxApp
The home screen provides:
• The PPM reading (negative number means the unit is not ignited)
• The LPH
2
(Low Pressure H
2
) Status
• H
2
(H
2
Tank Pressure)
• The battery status
• The battery charge percentage
• The Ignite button
Menu Options on phxApp
1. Tap Menu.
2. Tap any of the following:
• Calibrate: Calibrate manually.
• Self-check: Do a self-check on your phx42.
(You must have a Customer Portal login to submit an issue)
• Device Details: Provides more details about your device. Code of the day or login required.
Support will provide code of the day as needed.
• Update Firmware: Update the phx42’s firmware.
• Prepare to Ship: Drains battery and H
2
supply.
• Survey Components: Inspect components using a CSV file. Contact LTI Support for more
info.
• Settings: Set PPM Alarm and Response Factor.
• Report App Issue: Report an App Error or Bug. Use self-check to report an issue with the
phx42.
• Disconnect: Disconnect from the phx42.
• About: See versions of software, settings, and Firmware
To Next Page
Loading...
