LDARtools phx42 - Applicable Standards and Directives

UNCONTROLLED IF PRINTED 40
Applicable Standards and Directives
Ordinary Locations Safety Standards
IEC 61010-1: 2010 +C1:
2011 +C2:2013
Electrical Equipment for Measurement, Control, and Laboratory Use;
Part
1: General Requirements
*Note: For CB Scheme
EN 61010-1: 2010
Electrical Equipment for Measurement, Control, and Laboratory Use;
Part
1: General Requirements
*Note: For European differences of CB Scheme
UL 913: Ed 8: 2013 and
Standard for Intrinsically Safe Apparatus and Associated Apparatus for
Use in Class I, II, III, Division 1, Hazardous (Classified) Locations
CAN/CSA-C22.2 NO. 157-92
(R2016)
Intrinsically Safe and Non-Incendive Equipment for Use in Hazardous
Locations
UL 61010-1-2012 and CSA
C22.2 No. 61010-1-12
Electrical Equipment for Measurement, Control, and Laboratory Use;
Part
1: General Requirements
*Note: For USA and Canada national differences of CB Scheme
Hazardous Locations Safety Standards
IEC 60079-0: 2011 +C1:
2012 +C2:2013
Explosive atmospheres - Part 0: Equipment - General requirements
*Note: For IECEx Certification
IEC 60079-1: 2014
Explosive atmospheres - Part 1: Equipment protection by flameproof
enclosures "d"
*Note: For IECEx Certification
IEC 60079-11: 2011 +C1:
2012
Explosive atmospheres - Part 11: Equipment protection by intrinsic
safety
"i"
*Note: For IECEx Certification
EN 60079-0: 2012 /
A11:2013
Explosive atmospheres - Part 0: Equipment - General requirements
*Note: For ATEX Certification
EN 60079-1:2007
Explosive atmospheres - Part 1: Equipment protection by flameproof
enclosures "d"
*Note: For ATEX Certification
EN 60079-11:2012
Explosive atmospheres - Part 11: Equipment protection by intrinsic
safety
"i"
*Note: For ATEX Certification
UL 1203, 5th Ed., Revised:
04/24/2015
Explosion-proof and Dust-ignition-proof Electrical Equipment for use in
Hazardous (Classified) Locations
*Note: For USA listing certification (Division scheme)
UL 60079-0, 6th Ed.,
Revised: 07/26/2013
Explosive atmospheres - Part 0: Equipment - General requirements
*Note: For USA listing certification (Zone scheme)
UL 60079-1, 6th Ed.,
Revised: 08/09/2013
Explosive atmospheres - Part 1: Equipment protection by flameproof
enclosures "d"
*Note: For USA listing certification (Zone scheme)