CS10/CS15 & GS Sensors, Description of the System
19
GS05/GS06 The software is stored in the flash RAM of the GS05/GS06.
GS firmware update instructions
• Download the most recent GS firmware file from
https://myworld.leica-geosystems.com. Refer to "Intro-
duction".
• Connect the CS field controller to your PC. Refer to "4.1.13
Connecting to a Personal Computer".
• Copy GS firmware file into the /SYSTEM directory of the
Leica SD card.
• Connect the GS05/GS06 to the CS field controller. Refer to
"4.1.11 Setting up as Handheld GNSS".
• Establish a connection between the GS05/GS06 and the CS
field controller. Refer to the Leica Viva TechRef (Connec-
tions.. - GPS connection wizard).
• Start the upload. Refer to the Leica Viva GNSS Getting
Started Guide (Appendix B Uploading System Files).
• A message will appear when the upload is complete.
GS08plus/GS12 The software is stored in the flash RAM of the
GS08plus/GS12.
ME firmware update instructions
• Download the most recent ME firmware file from
https://myworld.leica-geosystems.com. Refer to "Intro-
duction".
• Connect the CS field controller to your PC. Refer to "4.1.13
Connecting to a Personal Computer".
• Copy ME firmware file into the /SYSTEM directory of the
Leica SD card.
• Connect the GS08plus/GS12 with the GEV234/GEV237
cable to the CS field controller and establish a connection
between the GS08plus/GS12 and the CS field controller.
Refer to the Leica Viva TechRef (Connections.. - GPS
connection wizard).
• Start the upload. Refer to the Leica Viva GNSS Getting
Started Guide (Appendix B Uploading System Files).
• A message will appear when the upload is complete.
Software for Description
To Next Page
Loading...
