CS10/CS15 & GS Sensors, Care and Transport
54
5.3 Cleaning and Drying
Product and
accessories
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or pure alcohol. Do not use other liquids; these may attack the polymer
components.
Damp products Dry the product, the transport container, the foam inserts and the accessories at a
temperature not greater than 40°C/104°F and clean them. Remove the battery cover
and dry the battery compartment. Do not repack until everything is dry. Always close
the transport container when using in the field.
Cables and plugs Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting
cables.
Connectors with
dust caps
Wet connectors must be dry before attaching the dust cap.
To Next Page
Loading...
