Leica RM2235 - Assembling the Handwheel

16
Instructions for Use V 2.3 RevH – 05/2018
4. Instrument Setup
The feather key (4) is loosely
placed in the handwheel shaft (1)
and fixed in place with a cable tie
during transport.
• Removethecabletie(3).
Caution!
Make sure not to lose the
feather key!
• Placethehandwheel(2) on the
handwheel shaft (1) as shown.
• Tightenthescrew(2a) located
in the center hole of the hand-
wheel with a Allen key No. 4 (5).
• Removethecoverfoilfromthe
self-adhesive cover disk and
fix the cover disk on the hand-
wheel.
4.4 Assembling the handwheel
Fig. 9
1
3
2
2a
5
4
The handwheel has to be assembled before attempting
to use the instrument.
The necessary parts and tools can be found in the toolkit
supplied in the delivery.