Leica RM2235 - Vee Insert

31
Leica RM2235
The vee insert (70) is mounted in the hole pro-
vided in the lower movable jaw of the standard
specimen clamp.
This makes it possible to clamp round specimens
in the standard specimen clamp.
• Turntheknurledscrew(66) counterclockwise
to move the movable jaw (68) downward.
• Insertthepin(70.1) of the vee insert (70) in the
hole (69) of the lower jaw (68).
• Mountthespecimenasrequired.
• Turntheknurledscrew(66) clockwise to move
the movable jaw with the vee insert upward
against the fixed jaw to securely clamp the
sample.
70
66
69
70.1
68
6.2.2 Vee insert
6. Optional Accessories
Fig. 26