46
Instructions for Use V 2.3 RevH – 05/2018
6. Optional Accessories
6.9 Magnifying lens
Fig. 50
Fig. 52
Fig. 51
• Openthescrew(3) on the horizontal arm of
the microscope carrier in a counterclockwise
direction.
• Insertthesilverconnectionpiece(1) as far as
it will go. Tighten the screw (3).
• Theadapter(2) allows a fiber-optic light guide
to be installed.
• Adjustthepositionofthemagnifyinglensto
the specimen being processed.
The magnifying lens can be swiveled com-
pletely to the side if necessary.
1
3
2
4
• Usetheprovidedprotectivecap(4) to cover
the magnifying lens.
• TheinstrumentillustrationsinFig.51andFig.52
are an example only.
The magnifying lens provides a 2x
magnification and can be used with all
Leica 2200 series rotary microtomes.
Always protect the magnifier glass
from exposure to direct sunlight!
Exposure to sunlight may cause a
burning glass effect.
Danger of fire!