Unity Motorhome
68
Appliance and Equipment Operation
Seating/Sleeping
(Varies According to Floor Plan)
Installing the Removable Table Assembly
1. Locate the table leg and table top stored in
the bedroom cabinet/bed base.
2. Engage the table leg into the oor plate (3),
and install the table top onto the leg.
Converting Removable Table into Bed
1. Remove the table top and table leg from the
oor plate (3). Store the table and leg in the
bedroom cabinet/bed base.
2. Remove the seat cushions and extend the
seat bases as shown in Figure (4).
3. Arrange the seat cushions as shown in
Figure (5).
3
Twin Bed Conversion
1. Fold out the cushion support (1).
2. Insert the two cushions (2), stored below the
bed cabinet.
2
5
1
4
To Next Page
Loading...