Leisure Unity - Interior Care & Cleaning

Unity Motorhome
110
Motorhome Maintenance
Interior Care
Dirt and dust accumulation can not only detract
from the motorhome’s appearance, but can also
shorten the life of carpets and fabrics. Clean
and vacuum weekly to keep your motorhome
in pristine condition.
Carpets
Refer to the carpet manufacturer’s
recommendations for carpet cleaning and care,
and for information about stain removal.
Upholstery
Use care when cleaning the motorhome’s
upholstery, and choose an appropriate
cleaner or spot remover to avoid damaging
the materials. Regular vacuuming and wiping
with clear water will remove most stains. Any
major cleaning problems should be referred to
a professional cleaning service.
NOTICE
Direct sunlight will fade upholstery and
fabrics. o minimize fading close drapes
blinds and shades whenever possible.
Spots and Stains
Most spots and stains can be removed using
clear warm water. To prevent the stain from
spreading, start from the outside of the stain
and work towards the center.
Stains such as lipstick, grease, ink, or mustard
are very hard to remove and might require the
help of a professional cleaning service.
Vinl abrics
Clean vinyl surfaces using a soft, damp cloth
and mild detergent. Never use solvents of any
kind on vinyl surfaces.
O he vinl manufacturer recommends
the following o clean most common
household stains use warm, soapy water,
and a clear water rinse. or more stubborn
stains, Fantastik™ or Mr. Clean™ diluted
31 with water are recommended.
Draperies, Curtains, and Bedspreads
Draperies, curtains, and bedspreads are
made from a variety of fabrics and materials.
any o these aterials could shrink up to 5
percent during the cleaning process. Always
use a professional cleaning service for you
motorhome’s textiles.
NOTICE
sing waterbased or detergentbased
solvent cleaners on fabrics ma cause
excessive shrinkage and permanent stains.
Walls
Clean walls using warm water and mild soap.
For extensive accumulations of dirt and grime,
add a small quantity of rubbing alcohol to the
water. Do NOT use solvents or abrasives.