Leisure Unity - Murphy Bed & Seating Conversions

Unity Motorhome
0
Leisure Lounge lus Sstem optional
Lowering the urph ed
1. Refer to the Slide Out Room section in the
ehicle peration chapter in this anual
for details.
2 Raise the table if necessary, secure in
upright position with latch (1), fold table leg
2 downwards into otto o tale, and
close irrored door 3 ensuring it latches
securely to the agnets 
3 Ensure lounge chairs are in the fully upright
position using recliner uttons 5 on the
side of the chair.
 Rotate lounge chairs so they are facing
away from bed by lifting and holding the
lock utton  while you swivel the seat
Release the lock button when the chair is
slightly rotated to ensure the seat locks into
the next position.
5 Remove the lounge chair seat back
cushions and headrests, and fold the seat
acks orward until they lay at 7
 Release the locks (8) on both sides of the
Murphy bed (rotate to unlock).
7. se handle 9 to slowly and careully
lower the Murphy bed. Ensure the Murphy
bed locks into place once fully lowered by
lifting slightly on the side of the bed. If bed
is not locked, sit on corner of bed to apply
additional downward pressure.
8. Lower step cover 10 Reer to the Step
Cover section in the ehicle peration
chapter of this manual.
1
2
3
4
5
6
7
8
9
10
Appliance & Equipment Operation