Leisure Unity - Water Pump Switch

Unity Motorhome
91
Water  lumbing Sstem
otable Water
When a city water supply connection is not
availale, ll the resh water tank using the
following procedure:
1. Fill a suitable water container with potable
water.
2 Place the suction hose  attached to the
winterie ypass valve into potale water
container.
O he winterize bpass valve 
is located in the exterior utility center.
3 Turn the winterie ypass valve 7 to
WTR, and water ll selector valve
2 to water tank ll 
 Turn on the water pup switch 5 on the
system monitor panel.
5 Depress and hold the fresh water tank level
switch 3 to show the percentull level on
the L display  nce the resh water
level reads full on the LED display, turn off
the water pump.
 Turn the winterie ypass valve 7 to
RL LW, and the water ll selector
valve 2 to city water 
Water ump Switch
When the water pup switch 1 is in the 
position, the water pump will automatically
activate when using the shower, toilet, or any
faucet. The water pump switch is located on the
system monitor panel in the cabinet above the
coach entrance.
NOTICE
Always turn off the water pump switch (1)
if leaving the motorhome unattended for an
extended period of time and when driving
to prevent ecessive damage and batter
discharge in the event of a leak.
1
6
7