5. SAFETY DECAL
MAINTENANCE
Safety decals on the Astronaut milking robot display important and useful
information that will help you safely operate and maintain the milking robot.
Obey the instructions below to make sure all the decals stay in the correct
position and condition.
• Keep the safety decals clean and legible at all times. Clean the safety
decals with soap and water. Do not use mineral spirits, abrasive cleaners
or other similar agents that may damage the safety decals
• Replace safety decals that are missing or are illegible
• Safety decals can be purchased from your local Lely service provider.
Safety Decal Maintenance 5-1
5.1004.8506.0 -