5.4101.8538.0 B
8-2 M12 Connectors
Do not use pliers to tighten or loosen the M12 connectors.
Connect
To connect the M12 connectors:
1. Align the markings (1 and 2) of the M12 connector (see figure 25 on page 8-2).
Figure 25. Alignment M12 connector
KEY: 1. Mark white or black - 2. Mark
2. Connect the male connector to the female connector.
The connectors must be placed straight and without any angle, markings
white or black of the male and female connectors must be aligned with
the ridge of the connector on the boxes.
in n o vato rs in ag ric u lt u re
To Next Page
Loading...
