Page 28/95
21January2021/Version 0
LEM International SA
Chemin des Aulx 8
1228 PLAN-LES-OUATES Switzerland
www.lem.com
x2
x2
1
2
5
3
4
• The Meter Unit can be positioned on a DIN Rail TH 35-7.5 or TH 35-15 (IEC 60715: 2017)
• Possibility to x the Meter Unit with 2x M4 screws (max), max torque 1.2 N⋅m.
t
• The Sensor Unit can be positioned on a DIN Rail TH 35-7.5 or TH 35-15 (IEC 60715: 2017)
• The Sensor Unit with 4x M4 screws with washer. Screw head + washer ≤ 4.5 mm,
max torque 3.5 N⋅m.
1
2
≤ 4.5 mm
To Next Page
