29
High Beams
Push the lever toward the instrument panel to switch the high beams on. Push the lever toward the instrument
panel again or pull the lever towards you to switch the high beams o.
Headlight Flasher
Pull the lever toward you to ash the headlamps and release the lever to switch the headlamps o.
Direction Indicators
e turn signal lever does not mechanically lock in the upward or downward position when activated. e turn
signal control activation and cancellation is electronic.
• To operate the le turn signal, push the lever down until it stops and release
• To operate the right turn signal, push the lever up until it stops and release
• To manually cancel turn signal operation, push the lever again in either direction
Lane Change
To indicate a le or right lane change:
• Push the lever up/down to the rst stop position and release. e turn signals will ash three times and stop.
• Push the lever up/down to the rst stop position and hold. e turn signals will ash for as long as the lever is
held in this position.
To Next Page
Loading...