54
Opening the Hood / Hood Prop Rod
e Hood Prop Rod is a safety device designed to assist in holding the Ballistic hood open during servicing.
1. To open the hood, go inside the vehicle and pull the hood release handle located on the driver side kick panel
2. Go to the front of the vehicle and release the secondary hood latch located centered just below the front edge
of the hood
3. Apply slight down pressure to the hood while releasing the secondary latch
4. Move to the side and li the hood from a corner
5. Once hood is fully opened pivot the Hood Prop Rod into place
Closing the Hood
To close the hood, return the prop rod to its original stowed position in the retaining clip. Pull the hood down
until it is in the fully closed position. Be sure all personnel and equipment are clear before closing the hood.
Hood Prop Rod
To Next Page
Loading...