LENCO BearCat - Vehicle Lubrication; Welding Precautions

59
Tire and Wheels
Rim sizes for the G-2 are 19.5 inch standard with an optional 22.5 inch available. Both options come tted with
aggressive prole heavy duty tires.
Rim size for the G-3 and G-4 is 20 inch tted with military style rough terrain tires.
All vehicles can be ordered with optional Run Flat Inserts.
Air Conditioning R134A Refrigerant amount:
2.7 lbs. (with optional rear Auxiliary Heater/Air Conditioner)
Glass
Install Materials:
Dinitrol D-538 one step primer
Dinitrol D-500 urethane (low viscosity)
CRL Glass Cleaner -1973
CRL General Purpose Solvent-2032
CRL Glazing Tape 74418X14BL
Rubber setting Blocks
Vehicle Lubrication
• Turret Ring Gear - Use Multipurpose High Temp Grease NLG1 2 ISO VG460 or Equivalent. Do not over grease
Turret Ring Gear. Over greasing can cause the Turret Ring Gear to slow down.
• Door Hinge - Use Multipurpose High Temp Grease NLG1 2 ISO VG460 or Equivalent.
• Gun Ports - equipped with oil lite bushing - No Lubrication Needed.
• Gunner Stand - has bronze slide ways - No Lubrication needed to avoid dust/dirt buildup.
Welding Precautions
It is recommended that Technical Services be contacted at 1-800-444-5362 before any welding or cutting.