LENCO BearCat - VSP Style Low Profile Lighting

34
Rear LEDs
Rear LEDs are mounted above the rear door and alternately ash when activated.
Rear LEDs are turned on by ipping the switch labeled “REAR LEDs” located on the center console into the
forward position. Once activated, the switch will illuminate. Vehicle main power must be “ON” for Rear LEDs to
function.
VSP Style Low Prole Lighting
VSP style lighting consists of a series of LED Visor Lights located at roof level above the windshields and four LED
lights located at roof level on the side walls.
LEDs are controlled by rocker switches located in the center console. Fronts are tied in with the existing Front
LEDs and rears are tied in with the existing Rear LEDs.
Rear LEDs
Rear LEDs Switch
Visor Lights
Visor Light Switch
Side Rear LED Switch
Side Front and Rear LED’s
Side Front LED Switch