18
The Technician Settings can allow a user to
disable the “Until Next Scheduled Period”
option when unoccupied. This option applies to
stand-alone mode.
12. Reminders
Two customer reminders can be set and a
routine system check up.
• For both reminders, the name change be
customized and date and time set.
• For routine system check up the date and
time can be set.
13. Reset to Factory Defaults
reset and all reset.
• Reset reminders.
• Reset schedule.
• Reset all settings - Resets everything to
default.
• Reset all owner settings - Resets all
owners settings listed under general display
menus.
• Reset technician settings: Resets all
technician settings listed on the technician
menu.
Press < in the upper left-hand corner of the
screen to return to the technician settings
menu.
14. Change Owner Pin
This option is used to create or change
the owner pin number when screen lock is
enabled under the owner settings > generals
settings
lock can be set from home screen > menu >
owner settings > general. Screen lock ON or
OFF. Default is OFF.
15. RTU Fan On/Auto User Control
Options are OFF and ON. Default is OFF.
When this is set to on:
• RTU FAN is displayed on the home screen.
• FAN setting option is displayed under owner
settings menu.
When this is set to OFF, fan is not displayed
and fan option under owner settings is not
available.
To Next Page
Loading...
Need help?
General
