Lennox ComfortSense 8500 Series - Default Chapter; Table of Contents

2
Table of Contents
Shipping and Packing List ..................................3
CS8500 Features..................................................3
Product Dimensions ............................................4
Unit Dimensions (H x W x D) ......................................... 4
Wall Plate Dimensions (H x W) ...................................... 4
Wiring Specications ..........................................4
Communication Wire ..................................................... 4
Remote Sensor Wire ..................................................... 4
Transformer Wire............................................................ 4
Installation ............................................................5
Terminal Connections .........................................6
Purpose .......................................................................... 6
Wiring CS8500 (with or without CO Sensor) ................. 7
Installing Indoor Temperature Sensors ......................... 7
Installing Occupancy Sensor ......................................... 7
iCON™ by Lennox / L Connection
Equipment ............................................................8
Network Thermostat Control (NTC) Setup ..................... 8
M1 / M2 Unit Controller Setup ........................................ 9
M1 / M2 Unit Controller - Control Mode and
Backup Set Points Setup ............................................... 9
M3 Unit Controller Setup ................................................ 9
CS8500 Setup .............................................................. 10
BACnet with M3 Unit Controller .......................10
Network Topology ......................................................... 10
CS8500 Set Point Change ........................................... 10
CS8500 Occupancy Override ...................................... 11
BACnet Canceling Override ......................................... 11
Sensor Inputs ............................................................... 11
M3 Unit Controller Setup .............................................. 11
CS8500 Setup .............................................................. 13
CS8500 Sensor Failure ................................................ 13
Functions Not Supported ............................................. 13
CS8500 Troubleshooting .............................................. 13
M3 Unit Controller - Setting Return Air
Temperature Limits ...........................................14
Menu ...................................................................14
Technician Settings ...................................................... 14
Parameter Settings Based on System Conguration ... 15
Parameter Descriptions ................................................ 16
System Status Descriptions .............................19
Error Codes and Reminders .............................23