18
Touch to see a list of
available networks or to add a network
connection not shown (other). Also
displays network status (secured/unse-
cured), strength.
Do not use a guest account.
Do not use a unsecured connection.
Do not use your neighbor’s Wi-Fi.
Satellite provider network may cause is-
sues as well.
Touch the i for additional information
about a particular network (name, SSID,
security, RSSI, etc.).
Touch a particular network ID to connect
to that network. Enter password to con-
nect.
A red “X” means that there is an issue with
a connection point that must be resolved.
Name
Enter system name (Home 1, Home 2, etc) using
the keyboard tool.
Away
NOTE: Most of the procedures listed in this section can
be accomplished at the thermostat or using the
Lennox iComfort Thermostat App or consumer
web portal.
Manual Away
The user can manually put the system into away
mode by pressing the “away” icon. When the sys-
tem is in away mode, the horseshoe is grayed-out
and shows the “away” status text. In order to exit
away mode, the user can press the “cancel” icon.
In away mode, the away set points are used to con-
trol the system. The user can modify the away set
points from the default values in menu > settings
> away.
To Next Page
Loading...
