31
• Garage door openers
• Neighbor’s wireless devices
To eliminate a possible source of interference,
temporally disable any devices and see if Wi-Fi per-
formance has improved.
The ideal signal strength range for the thermostat
is -1 to -69 Received Signal Strength Indication
(RSSI). The signal strength can be viewed from the
thermostat interface.
1. Press ; This screen
shows a graphical view of options representing
OPEN and SECURE wireless networks, along
with options for adding a network.
2. Select the access point that has already been
established and connected.
3. When selecting the info icon, a screen will
appear which will display an option to forget
the network and IP address assigned to the
thermostat by your router, sub-net mask, router,
DNS and RSSI.
4. Scroll down to the last entry on this screen.
There the Wi-Fi signal strength will be
displayed (RSSI). If the RSSI signal strength
is anywhere between -9 to -69, then the signal
strength is sucient. If outside the reference
range, then either relocate the router closer to
the thermostat, add a repeater, or move the
thermostat. Adjusting antenna on router may
resolve the issue.
Home Network ........................
IP address 192.168.1.4
subnet mask 255.255.255.0
router
DNS
MAC address
i
forget this network
192.168.1.1
192.168.1.1
00:23:a7:b7:a1:70
-
An additional test method is with your cell phone.
1. Enabled the mobile hot spot option on your
phone.
NOTE: Not all data plans allow this function. Check with
your service provider for this option.
2. Connect the thermostat to your hot spot.
3. Allow up to ve minutes for the connection to
the Lennox Server.
4. If you are able to connect then you have veried
that the thermostat’s Wi-Fi is functional.
iComfort Mobile App (Applications)
The iComfort®
Thermostat App
(homeowner app)
is available for use
on iPhone
®,
iPad
®
and Android™
devices.
To Next Page
Loading...
