6
• Heating set point display
• Heating set point indicator on the round tempera-
ture band
• Plus (+) and Minus (–) options
• Home (return to Home Screen)
Touch the red heat set point indicator on
the round temperature band, or touch the
plus or minus to change the heating set
point in one degree increments.
During a scheduled time period, touching
either the set point indicator on the tem-
perature band or the heat-to will initiate a
schedule hold.
Current Outside Temperature
Displays current outside temperature in °F or °C
(optional Remote Outdoor Temperature Sensor re-
quired). If no sensor is used, then once connected
to the Internet and login to your account through the
thermostat, the option to get your outside tempera-
ture can obtained using the Internet option . Go to
menu > settings > display and set outdoor tem-
perature display to Internet.
Displays current time and date (supports daylight
savings time changes). When connected to the In-
ternet, time and date are automatically set.
Displays current inside relative humidity above cur-
rent indoor temperature.
The icon next to the indoor humidity percentage
also represents the humidity level in the home.
Displays current system operating mode below cur-
rent indoor temperature (heat/cool, heat only, cool
only, active schedule or o)
Touch to access screen.
Touch on home
screen under current operating mode to
access screen.
To Next Page
Loading...
