Lennox iComfort M30 - Home Screen Icons and Functions; Navigation and Notification Icons; System Status Icons

8

The following icons are located on home screen and will appear during applicable operations or tasks.
NOTE: The system status icons located along the left-side of the screen will display a text description when touching the
icon.
Table 1. System and Event Icons
Icon Function Screen Text Purpose
4
Navigation Menu
Selecting this icon will bring up user and installer
menus. A red circle with a number inside of it indi-
cates a notication is active.
Function Away
When the away icon is touched, the system will au-
tomatically use energy saving settings - heat-to 62
(16.5) and cool-to 85 (29.5). Temperatures can be
adjusted by pressing on the available temperature
setting (i.e., heat-to or cool-to). To exit away, press
the cancel icon. In a zoning system, all zones are
set to a single heat-to and cool-too setting. Note
that when manually selecting Away from the home
screen, the Smart Away feature (if enabled under
settings) will be temporally disabled until Away is
canceled.
System Status Heating
System is heating the home.
System Status Cooling
System is cooling the home.
System Status Humidifying
If humidication equipment is installed and cong-
ured, the system will display this message when
adding humidity to the air in the home.