Replacing CRUs 38
Replacing the memory module
Attention
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
If your computer supports one memory module, install the module into the DIMM 1 slot. If your computer
supports two memory modules, install one memory module into the DIMM 1 slot rst and then install the
other into the DIMM 2 slot. See
System board for the locations of the slots.
1
Remove any media from the drives and turn off all connected devices and the computer.
2
Disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
3
Remove the computer cover. For details, see Removing the computer cover.
4
Remove the bottom cover. For details, see Replacing the bottom cover.
5
Replace the memory module.
1 2
3
4
6
Reinstall the removed parts and computer cover. For details, see Completing the parts replacement.