Attaching a cable lock
A cable lock can be used to secure devices, such as the keyboard and the mouse, by locking the device
cables to the computer. The cable lock connects to the cable-lock slots on the rear of the computer. To
install a cable lock, do the following:
1. Insert the clip
1 into the cable-lock slot 4 .
2. Pull the cables you want to lock through the dents in the cable lock.
3. Press the clip
2 into the cable-lock slot 3 until it snaps into position.
Figure 8. Attaching a cable lock
12 M920t User Guide and Hardware Maintenance Manual
To Next Page
Loading...
