Replacing the front I/O bracket
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all
power cords from electrical outlets and disconnect all cables from the computer.
2. Remove the computer cover. See “Removing the computer cover” on page 17.
3. Remove the front bezel. See “Replacing the front bezel” on page 18.
4. Replace the front I/O bracket.
Figure 27. Removing the front I/O bracket
Figure 28. Installing the front I/O bracket
26 M920t User Guide and Hardware Maintenance Manual
To Next Page
Loading...
