• Go to https://datacentersupport.lenovo.com/products/servers/thinkedge/se350v2/7da9/downloads/driver-list
to see the latest firmware and driver updates for your server.
• Go to “Update the firmware” in User Guide or System Configuration Guide for more information on
firmware updating tools.
Procedure
Step 1. Make preparations for this task.
a. Carefully lay the node on a flat, static-protective surface.
Step 2. Insert the system board into the node at an angle as illustrated.
Figure 90. Installation of a system board
Step 3. Carefully slide the system board toward the rear of the node; then, seat the system board onto the
guide pins of the chassis.
Figure 91. Installation of a system board
Chapter 1. Hardware replacement procedures 109
To Next Page
Loading...
