Figure 114. System-board connectors
Table 8. System-board connectors
1 Fan 1 connector
11 GND busbar for the power module board
2 Intrusion switch connector
12 P12V busbar for the power module board
3 Fan 2 connector
13 MicroSD card socket
4 Fan 3 connector
14 TCM/TPM connector
5 SATA connector 15 I/O module board signal connector
6 MCIO 1 connector
16 Lock position switch cable connector
7 MCIO 2 connector
17 Front operator assembly connector
8 Power input board connector
18 I/O module board power connector
9 3V system battery (CR 2032) 19 3V security battery (CR 2032)
10 Power module board connector
Troubleshooting by system LEDs
See the following sections for information on available system LEDs.
Drive LEDs
This topic provides information on the drive LEDs on the front of the server.
The following table describes the problems that are indicated by drive activity LED and drive status LED.
Chapter 3. Problem determination 151
To Next Page
Loading...
