Lenovo ThinkEdge SE350 V2 - Power Input Board Module Replacement

• Install a drive cage (see “Install a drive cage” on page 50).
• Proceed to complete the parts replacement (see
“Complete the parts replacement” on page 125).
Demo video
https://www.youtube.com/watch?v=6H3mBi8JTgA
Power input board module replacement
Follow instructions in this section to remove or install a power input board (PIB) module.
Remove the power input board module
Follow instructions in this section to remove the power input board module.
About this task
To avoid potential danger, make sure to read and follow the safety information.
• S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off
the electrical current supplied to the device. The device also might have more than one power cord.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Attention:
• Read “Installation Guidelines” on page 1 and “Safety inspection checklist” on page 2 to make sure that
you work safely.
• Remove the shipping bracket, if applicable (see
“Configuration guide” on page 9); then, power off the
server and disconnect the power cords (see
“Power off the server” on page 8).
• Remove the node from the enclosure , if applicable (see
“Configuration guide” on page 9); then, carefully
lay the node on a flat, static-protective surface.
Procedure
Step 1. Make preparations for this task.
a. If applicable, unlock or remove any locking device that secures the top cover, such as a
Kensington lock; then, remove the top cover (see
“Remove the top cover” on page 122).
b. Disconnect all the drive cables from the system board; then, remove the drive cage from the
node (see
“Remove the drive cage” on page 44).
c. Remove the power module board and disconnect the cables between the power module board
and power input board module (see
“Remove the power module board” on page 86 and
“Cable routing for the power module board and power input board module” on page 136).
82
ThinkEdge SE350 V2 Hardware Maintenance Guide