Lenovo ThinkEdge SE350 V2 - CMOS Battery (CR2032) Replacement

Figure 32. Installation of an air baffle
Step 2. Lower the air baffle down into the slot; then, press down the air baffle until it is securely seated.
After this task is completed
• Proceed to complete the parts replacement (see
“Complete the parts replacement” on page 125).
Demo video
https://www.youtube.com/watch?v=e_FvSSUt2R8
CMOS battery (CR2032) replacement
Follow instructions in this section to remove or install a CMOS battery.
Remove a CMOS battery (CR2032)
Follow instructions in this section to remove a CMOS battery.
About this task
To avoid potential danger, make sure to read and follow the safety information.
• S002
36 ThinkEdge SE350 V2 Hardware Maintenance Guide