Lenovo ThinkEdge SE350 V2 - Page 30

Step 2. (Optional) If necessary, open the rack release latches and tighten the screws to firmly secure the
enclosure to the rack.
Figure 18. Installation of screws to the rack release latches
1 Rack release latches 2 Front screw
Install a shipping bracket to the enclosure
Procedure
Step 1. Make preparations for this task.
a. If necessary, connect the power cords and power on the server (see
“Power on the server” on
page 7
).
b. Connect all necessary external cables to the node.
Step 2. Insert the shipping bracket to the front of the enclosure.
Figure 19. Installation of an shipping bracket
Step 3. Tighten the seven screws as shown to secure the shipping bracket.
22
ThinkEdge SE350 V2 Hardware Maintenance Guide