Lenovo ThinkEdge SE350 V2 - Page 84

Attention:
• Make sure to adopt one of the supported configurations listed in
“Memory module installation rules and
order” on page 5
.
• Memory modules are sensitive to static discharge and require special handling. Refer to the standard
guidelines at
“Handling static-sensitive devices” on page 3:
– Always wear an electrostatic-discharge strap when removing or installing memory modules.
Electrostatic-discharge gloves can also be used.
– Never hold two or more memory modules together so that they do not touch each other. Do not stack
memory modules directly on top of each other during storage.
– Never touch the gold memory module connector contacts or allow these contacts to touch the outside
of the memory module connector housing.
– Handle memory modules with care: never bend, twist, or drop a memory module.
– Do not use any metal tools (such as jigs or clamps) to handle the memory modules, because the rigid
metals may damage the memory modules.
– Do not insert memory modules while holding packages or passive components, which can cause
package cracks or detachment of passive components by the high insertion force.
• Read
“Installation Guidelines” on page 1 and “Safety inspection checklist” on page 2 to make sure that
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
node; then, remove it from the package and place it on a static-protective surface.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/products/servers/thinkedge/se350v2/7da9/downloads/driver-list
to see the latest firmware and driver updates for your server.
• Go to “Update the firmware” in User Guide or System Configuration Guide for more information on
firmware updating tools.
Procedure
Step 1. Make preparations for this task.
a. In the case of altering memory configuration, refer to
“Memory module installation rules and
order” on page 5
to ensure a valid configuration is planned.
b. Locate the slot to install the memory module.
76
ThinkEdge SE350 V2 Hardware Maintenance Guide