EasyManua.ls Logo

Lenovo ThinkPad E480 - Power Management; Sleep Mode; Hibernation Mode

Lenovo ThinkPad E480
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9. Press F10 to save changes and exit the ThinkPad Setup program. The user hard disk password and the
master hard disk password have been removed.
Power management
To reduce power consumption, the computer has two power management modes: sleep and hibernation.
Sleep mode
When the computer enters sleep mode, the following events occur in addition to what occurs in screen blank
mode:
The LCD is powered off.
The hard disk drive or solid-state drive is powered off.
The microprocessor stops.
To put your computer into sleep mode, do the following:
Open the Start menu, click
Power, and then click Sleep.
In certain circumstances, the computer goes into sleep mode automatically:
After a period of inactivity specified in power plan settings
When the battery power is low
To cause the computer to return from sleep mode and resume operation, do one of the following:
Press any key.
Open the LCD cover.
Turn on the power button.
Also, in either of the following events, the computer automatically returns from sleep mode and resumes
operation:
The ring indicator (RI) is signaled by a serial device or a PC Card device.
The time set on the resume timer elapses.
Note: The computer does not accept any input immediately after it enters sleep mode. Wait a few
seconds before taking any action to reenter operation mode.
Hibernation mode
In hibernation mode, the following occurs:
The system status, RAM, VRAM, and setup data are stored on the hard disk drive, hybrid drive, or solid-
state drive.
The system is powered off.
Note: If the computer enters the hibernation mode while it is docked to the docking station or the port
replicator, do not undock it before resuming normal operation. If you do undock it and then try to resume
normal operation, you will get an error message, and you will have to restart the system.
If you have defined one of the following actions as the event that causes the system to go into hibernation
mode, perform that action.
Closing the lid.
Pressing the power button.
36
E480, E485, and R480 Hardware Maintenance Manual

Table of Contents

Other manuals for Lenovo ThinkPad E480

Related product manuals