Note: Applying labels to the base cover
When you replace the base cover, you need to stick some labels on the new
base cover. Some of the labels have been shipped with the new base cover,
and some may need to be reused from the old base cover.
Following labels are the typical labels stuck on the bottom side of the
computer when it is shipped.
a Windows license label (COA)
b Product label
c FCC or homologation label
d MAC address label
b
a
c d
For some models, you also need to apply one or two FCC labels or the other
types of labels. Check the old base cover; if it has one or two FCC labels or
the other types of labels, find duplicates of them in the package and apply
them to the new base cover.
Removing and replacing a FRU
ThinkPad Z61t 91
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General